Gen2 suspension crossmember under cover...

might give that middle plate a topcoat of sunrise red rustoleum
to match a red truck on the underbelly where the sun do not shine upon

1715090541004.png
 
JayQQ97 said:
18-Nov-2o23

this here perhaps is the genuine solution

TOYOTA TACOMATRN240L-TRPDKA - BODY - FRAME | Japan Parts EU

TOYOTA TACOMATRN240L-TRPDKA , FRAME
www.japan-parts.eu www.japan-parts.eu


View attachment 41797


Front Suspension Member Brace Sub-Assembly Right Hand #51403-04020 | Autoparts.toyota.com

Boost your Toyota's stability and ride comfort with our Front Suspension Member Brace Sub-Assembly Right Hand. Genuine, optimal fit, and backed by a warranty.
autoparts.lewistoyota.com
79$

Front Suspension Member Brace Sub-Assembly Left Hand #51404-04020 | Autoparts.toyota.com

Boost your Toyota's stability and ride comfort with our Front Suspension Member Brace Sub-Assembly Left Hand. Genuine, optimal fit, and backed by a warranty.
autoparts.lewistoyota.com
91$
Click to expand...

so tired of looking at the dumAsz zipTies

might pull the trigger with an extra 20 per cent off MD sale

save another 35$ on these
142$ no xtra shipping
calculated 44 per cent off MSRP
 
You still replacing that old clapped out truck one piece at a time? You do realize its a lot less money in the end just to buy a complete truck.
 
Perhaps It takes some getting used to comparing with the MT gen1 and the way it zips or doesn't
 
Hi!))
It sounds like the nuts should be welded to the frame to hold the bolts. If they keep spinning, you might need to get a welder to fix them or find an alternative fastening solution. Double-check the diagram and consult your dealer for precise information. Good luck with the repair!
 
Lewis Xenos said:
Hi!))
It sounds like the nuts should be welded to the frame to hold the bolts. If they keep spinning, you might need to get a welder to fix them or find an alternative fastening solution. Double-check the diagram and consult your dealer for precise information. Good luck with the repair!
Click to expand...
this may be a cause of dissimilar metal rott but IDK
its a subassembly of the frame so the part looks to be replaceable with a new piece and new nut welded onto it
the nut rotted off with the bolt but the frame piece its welded to has NOT a lick of rust that i can tell onit
 
Black looks better, if anything the color aluminum would look nicer than that. I coated my trucks engine shield on both sides with cosmoline 4 years ago...still has no rust, and looks new.
 
You must log in or register to reply here.
Back
Top