Vibration in floorboard area btw 60-65mph

C-Money

C-Money

Active Member
Getting some pulsing vibration in floorboard area btwn 60-65mph on my 2014 Taco prerunner DCSB. Could this just be a wheel balance issue? Have never had wheels balanced since new. 22k on truck.
 
Most likely since they've gone that far without being balanced.... It's typically a good practice to balance every 5-6000 miles
 
I am getting the rotations every oil change. Just never had the tires balanced. Will see if that clears the vibs. Thx!
 
It will had same issue in my 08 at around 70-75. Then hit a bump and it used to jump into the other lane. Balanced the tires and she rides great
 
As tires wear down, they slowly get off balance... Balancing and rotating every oil change is always a good idea on any vehicle
 
Update: The balance did not work! Still was getting the floorboard vibration and pulsing humming noise. Loudest at 65-67mph. Dealer did some troubleshooting ~ 4hrs worth and it turned out to be a bad passenger side rear wheel bearing. They replaced it and now it's quiet like it was when it drove off the lot! Hopefully it was just a fluke bad bearing...
 
I have that same issue in my 14 double cab. Getting new tires soon but I'm interested about the wheel bearing issue. I wonder if they could look at that for me
 
I would take it before the warranty is up. If it's bad they should replace it free of charge. It was definitely aggravating every time I crossed into the 65-67mph range. Now it's super quiet! I guess some will try to fool you saying it's tire issues, but a good dealer should make it right!
 
You must log in or register to reply here.
Back
Top