Search results

  1. B

    How many miles are on ur rig?

    182000 and running strong
  2. B

    Wheels for 3” lift?

    My brother is looking for wheels to put on his 2015 tacoma that will have a 3” lift. He wants 20” rims. What offset does he need to not rub?
  3. B

    3"lifted

    Completely correct. Of i did alot of wheeling and was really aggressive that would be an issue. As my daily driver i dont push it hard on the trails so smashing my strut is no issue at the moment. When i get my new taco i will be keeping my current one. Then i will be upgrading as it will not be...
  4. B

    3"lifted

    I didnt do the 5100’s on the front because i heard that cranking the coils to the 2.5” height made for a harsh ride and with as many highway miles that i put on i wanted to keep the factory ride.
  5. B

    3"lifted

    No. I was actually able to get the alignment spot on with the stock ucas but came across the pair of fabtech ucas brand new on craigslist for 150.
  6. B

    3"lifted

    I did a 3” motofab spacer lift. Will upgrade probably to an old man emu at some point but i do not do much wheeling at the moment so the spacer lift works for me. I put bilstein 5100 in the rear with block. I did put fabtech ucas as well. Running factory whee with spydertrax wheel spacers.
  7. B

    Rubbing after installing fabtech ucas.

    But i still have a popping that occurs once and a while if i brake hard to a stop or when i stop and go from forward to reverse or reverse to forward and turn the wheel. Wondering if the lca bushings are bad. It doeant happen all the time though. Maybe cvs? Any thoughts?
  8. B

    Places to wheel near lubbock , tx

    Suggestions on good spots to wheel in the lubbock area.
  9. B

    Rubbing after installing fabtech ucas.

    No more rubbing after alignment. Did have to trim a little on fender but other than that love the ucas.
  10. B

    Rubbing after installing fabtech ucas.

    Popping started before i installed ucas. I chose not to install diff drop. Could it be cvs popping?
  11. B

    Rubbing after installing fabtech ucas.

    What r ur thoughts?
  12. B

    Rubbing after installing fabtech ucas.

    I did a halfass alignment on it temporarily until i can get it to shop. It doent rub now. And yes still clicking. Almost sounds more like a squeak. And just about 4 days ago something started to pop occasionally when i turn sharp or brake hard. Just a single pop. Im thinking it might be my lower...
  13. B

    Rubbing after installing fabtech ucas.

    Im going to get alignment just didnt think that they would change it hat drastically. But now that i have good daylight i see why its rubbing. Its got pretty bad toe out pushing the tires towards the back of the fender well.
  14. B

    Rubbing after installing fabtech ucas.

    I just installed the ucas. Was running stock ucas with lift and 285's with no rubbing. Now im rubbing on body mount. Will alignment fix that problem or will i have to trim?
  15. B

    3"lifted

    3" lift 285/75r16 k02s on stock wheels with trd center caps.
  16. B

    Front end clicking

    I wish it was just a rock in the tread. I'd like to get it up on a lift and see exactly where its coming from.
  17. B

    Front end clicking

    I just put a new set of 285/75r16 bfg k02's but i had a set of 265 duratracs before and i had the same clicking.
  18. B

    Fabtech upper control arms

    And u dont bottom out ur struts at full compression?
  19. B

    Fabtech upper control arms

    What did u do as far as bump stops?
  20. B

    Front end clicking

    Straight most of the time. Havent noticed anything while turning. And its not all the time. It comes and goes but when it does click i can apply a little brake pressure and it stops. Most of the time comes right back on as soon as i release the brake but not all the time.
Back
Top