in2nit build thread

in2nit

in2nit

Well-Known Member
Here we go. Funny don't remember it looking like this. The beginning
 

Attachments

  • 82864d1293679084-in2nite-engage-offroad-build-james-truck-new.webp
    82864d1293679084-in2nite-engage-offroad-build-james-truck-new.webp
    40.6 KB · Views: 58
I started on custom tacos. I did my first trip after installing 3" Kings.
 

Attachments

  • 82859d1293677302-in2nite-engage-offroad-build-img_3122.webp
    82859d1293677302-in2nite-engage-offroad-build-img_3122.webp
    42.2 KB · Views: 59
  • 82858d1293677179-in2nite-engage-offroad-build-img_0056.webp
    82858d1293677179-in2nite-engage-offroad-build-img_0056.webp
    36 KB · Views: 58
After a few trips, Met a guy named Mohawk Mike who told me about Engage Off road and the transformation began.
 

Attachments

  • 82855d1293676593-in2nite-engage-offroad-build-img_3365.webp
    82855d1293676593-in2nite-engage-offroad-build-img_3365.webp
    38.1 KB · Views: 57
  • 82854d1293676523-in2nite-engage-offroad-build-img_3361.webp
    82854d1293676523-in2nite-engage-offroad-build-img_3361.webp
    43.8 KB · Views: 56
First was the front L/T, the next year came the rear. 50T pack and 16" Kings. Changed hangers and went to 12" shackles.
 

Attachments

  • 82849d1293676148-in2nite-engage-offroad-build-img00197-20100402-1408.webp
    82849d1293676148-in2nite-engage-offroad-build-img00197-20100402-1408.webp
    75.4 KB · Views: 54
I had an nfab tire carrier, but with a plastic bed, really didn't work out due to breaking the bed. So went to a dual stand up tire carrier.
 

Attachments

  • 82755d1293605131-in2nite-engage-offroad-build-img-20100909-00055.webp
    82755d1293605131-in2nite-engage-offroad-build-img-20100909-00055.webp
    40.3 KB · Views: 57
  • 82753d1293604925-in2nite-engage-offroad-build-img-20100909-00060.webp
    82753d1293604925-in2nite-engage-offroad-build-img-20100909-00060.webp
    33.9 KB · Views: 52
  • 82847d1293675913-in2nite-engage-offroad-build-dsc_0211.webp
    82847d1293675913-in2nite-engage-offroad-build-dsc_0211.webp
    77.9 KB · Views: 57
Due to width, time for glass works glass.
 

Attachments

  • 82756d1293605197-in2nite-engage-offroad-build-dsc_0620.webp
    82756d1293605197-in2nite-engage-offroad-build-dsc_0620.webp
    48 KB · Views: 58
  • 82757d1293605416-in2nite-engage-offroad-build-dsc_0601.webp
    82757d1293605416-in2nite-engage-offroad-build-dsc_0601.webp
    51 KB · Views: 57
Having my friend at Toyota change tranny fluid and 4.56 gears. Check out fully drooped
 

Attachments

  • 82758d1293605513-in2nite-engage-offroad-build-2010-05-179514.16.20.webp
    82758d1293605513-in2nite-engage-offroad-build-2010-05-179514.16.20.webp
    78.2 KB · Views: 55
Went up in tire size. Rolling 35" Pro comp Xterrain's
 

Attachments

  • 185436d1355811812-barstow-meet-12-15-2012-img_1840.webp
    185436d1355811812-barstow-meet-12-15-2012-img_1840.webp
    43.1 KB · Views: 54
For lighting, the roof has a 42" American Tough light and 2 Rigid Duallies. The bumper has a 21" Blitzpro, 2x 6" amber American Tough Light, and an unknown 10" spot.
 

Attachments

  • DSC07386.webp
    DSC07386.webp
    43.2 KB · Views: 58
Recently, added the new Engage Off road Glass.
 

Attachments

  • IMG-20130122-00129.webp
    IMG-20130122-00129.webp
    28.2 KB · Views: 50
  • IMG-20130216-00160.webp
    IMG-20130216-00160.webp
    19.3 KB · Views: 50
  • IMG-20130414-00273.webp
    IMG-20130414-00273.webp
    45.6 KB · Views: 48
Inside, 7" Lowrance GPS, Icom V8000 race radio w/ 2 position intercom, JVC stereo moved to lower console.
 

Attachments

  • IMG-20130409-00257.webp
    IMG-20130409-00257.webp
    39.4 KB · Views: 48
  • IMG-20130409-00256.webp
    IMG-20130409-00256.webp
    32.3 KB · Views: 49
That's it for now. Hope you like. I've been building this since 08 and its still not finished. Its certainly a blast though.
 
ProForce said:
Sweet! Can't wait to see the linked rear and full cage :D
Click to expand...
Unfortunately the link has to get put off for a bit. The front chassis needs to be built first. Showing signs of fatigue. So engine cage and chassis plating first. Hoping to do the link by the end of summer.
 
About a 3 months before I put the mid travel, rims and tires. A year after that, I met Hass (Desertduck) and did the long travel. Each year after since, Hass has done something major.
 
were gonna add these little beauties to his build thread for him:whistling2:

cutting off the OEM front clip so we can throw in tubes
picture.php


a side view of the cutting process
picture.php


and can you believe we get paid to do this!?:w00t:
 
You must log in or register to reply here.
Back
Top