Search results

Im selling this for 10k

I have a prerunner 2wd

From the back side you should be able to stick a pry bar in and pry against it as you tighten it back up with a impact

Jack it up under one side of the a-arm and bring the tire off the ground a inch or two. Stick a pry bar from the tire and pry up you will notice if you have any play in either the upper or lower

Ball joints

Yes the last one. I put this one on mine and remove the over load and it so much better

So why did you put axle shims in if you didn't raise the back? And you put them in correctly?

What size did you go too?

Spacers and the 5100 shocks are preloading the shock which give it the lift. But it also limits the travel and ride performance. And the rear blocks I wouldn't do with the bilsteins I would do the icon mini pack and remove the overload spring much better ride.

Does anyone have a 2.7l that I can barrow there stock intake to do smog? Will pay for the help. I tried all the wrecking yards none have any. Thanks

Any one in San Diego have a 2.7l Tacoma that I can barrow there stock intake for smog. Thanks

Would recommend just running a k&n stock filter The cold air intake system Letson way too much debris and fine dust. Or AFE makes a closed box unit for this

The rear The truck is superlight and if you throw in at a leave in the back you have to get New shocks and also ride really stiff look up maxtrac they sell Tacoma specific blocks

Amsoil has a lot of zinc which isn't good for these motors

Your thermostat is in backwards

High centered on a huge bush