nodoze
Member
*** SOLD ***
Up for sale is an NEW unused & uninstalled Bay Area Metal Fabrication Bolt-On Frame Rock Slider 80" with Kick Out 0º and Fill Plates for 2016+ Tacoma DCSB (Double Cab Short Bed). Originally $1.3K.
INCLUDED FEATURES
- Bolt-On
- Kick Out- Power Coated
- DOM Upgrade
- Fill Plates
- 0º flat that's best for use as a step
Purchased in 2019, then the pandemic happened. After that, life got busy and never found time to install so it sat propped up in the garage. I did get around to spraying some parts with black Rust-Oleum.
Will only consider local sales in or around the San Francisco Bay Area, California. I live in San Bruno so it would have to be local pick-up from there.
A LITTLE ABOUT THE SLIDERS:
The bolt on design for 2016+ trucks is 100% bolt on with no drilling and is the strongest "True bolt on available" with ten 1/2" Grade 8 bolts for each slider holding them on. Three of them are on the bottom side of the frame no other company offers that! (NOTE) some of the 2010 models have the older frames so some light modification may be needed to clear the rivets.
SPECS:
Built from 1.75" .120 wall DOM CNC plasma cut bent, notched and fully welded to a 2"x 2" square tube with CNC formed 3/16th laser cut legs and frame plates. Measured at the kick out they stick out 15" past the trucks frame.
BAMF WEBSITE:
https://www.bayareametalfab.com/2005-2023-Toyota-Tacoma-80-Bolt-on-Sliders-with-Kick-Out_p_81.html
Up for sale is an NEW unused & uninstalled Bay Area Metal Fabrication Bolt-On Frame Rock Slider 80" with Kick Out 0º and Fill Plates for 2016+ Tacoma DCSB (Double Cab Short Bed). Originally $1.3K.
INCLUDED FEATURES
- Bolt-On
- Kick Out- Power Coated
- DOM Upgrade
- Fill Plates
- 0º flat that's best for use as a step
Purchased in 2019, then the pandemic happened. After that, life got busy and never found time to install so it sat propped up in the garage. I did get around to spraying some parts with black Rust-Oleum.
Will only consider local sales in or around the San Francisco Bay Area, California. I live in San Bruno so it would have to be local pick-up from there.
A LITTLE ABOUT THE SLIDERS:
The bolt on design for 2016+ trucks is 100% bolt on with no drilling and is the strongest "True bolt on available" with ten 1/2" Grade 8 bolts for each slider holding them on. Three of them are on the bottom side of the frame no other company offers that! (NOTE) some of the 2010 models have the older frames so some light modification may be needed to clear the rivets.
SPECS:
Built from 1.75" .120 wall DOM CNC plasma cut bent, notched and fully welded to a 2"x 2" square tube with CNC formed 3/16th laser cut legs and frame plates. Measured at the kick out they stick out 15" past the trucks frame.
BAMF WEBSITE:
https://www.bayareametalfab.com/2005-2023-Toyota-Tacoma-80-Bolt-on-Sliders-with-Kick-Out_p_81.html
Last edited: