Drivers Side Taco Lean after lift

Discussion in '2005 - 2015 Toyota Tacoma' started by MattScatt425, Feb 12, 2018.

  1. MattScatt425

    MattScatt425 Well-Known Member

    Does having the drivers side taco lean create rubbing on turns?
    Last edited: Feb 12, 2018
  2. Avatar

    Tacoma Forum Sign Up!

    Join Today - It's Totally Free!

    Are you a Toyota truck fan? If so we invite you to join Our site is specifically designed for you and it's a great place for Toyota Tacoma Fans to meet online.
    Once you join you'll be able to post messages, upload pictures of your truck, and have a great time with other Toyota Tacoma fans. Whether your an old timer or just bought your Tacoma you'll find that is a great community to join. Best of all it's totally free!

    Join Today! JOIN FOR FREE

  3. Bojangles

    Bojangles Well-Known Member

  4. Bojangles

    Bojangles Well-Known Member

    Not that ive seen or herd
  5. OP

    MattScatt425 Well-Known Member

    Gheeze I need to speed check I'm mean spell check
    OR17TRD likes this.
  6. 4wd

    4wd Well-Known Member

    First off, what kind of lift ? & a couple pics should be posted to look at issue...Makes it a lot easier & quicker too...

    Anyway, 'taco lean isn't going to cause rubbing , driverside low , pass side higher correct ?
    OR17TRD, Bogunn and Bojangles like this.
  7. OR17TRD

    OR17TRD Well-Known Member

    That’s the Taco lean.
  8. Garrick

    Garrick Active Member

    Remove the steering column and keep the gas tank empty, no more lean!
    whippersnapper02 and Bogunn like this.
  9. 4wd

    4wd Well-Known Member

    Don't forget the battery...
    Garrick and Bogunn like this.
  10. TacoKen

    TacoKen Well-Known Member

    Mine had about 1/4 to 1/2 inch lean before I installed my Toytec 2 1/2 inch lift. I adjusted the left front shock 2 threads more than the right and lean is pretty much gone. Then had it aligned. No more lean.
    MattScatt425 and Garrick like this.
  11. OP

    MattScatt425 Well-Known Member

    Okay cool that's what I was thinking about doing just adjusting the left side to compensate thanks man!

Share This Page