Jsmashya13
Member
Guys I just recently lifted my truck with the 3" toytec ultimate lift, bilstein 5100s, rear AALs and SPC light racing UCAs with 18" Fuel Krank rims with 265/75/R18 Toyo open country MTs.
I did a lot of research prior to doing install and was told that I should have no rubbing or scrubbing with going with 32" tires. However I cannot tell if the wheels just weren't aligned right because they're only rubbing on the back of the wheel well and about an inch of clearing on front wheel well on full turns.
Alignment shop told me to let suspension break in before ride feels right but I don't think that sounded right. Wheel pulls pretty hard and has slight vibration at low speeds.
Basically I think the alignment guy was not very good and was hoping that someone on here is from rockland county NY and can reccomend a good alignment shop before I start trimming any plastic.
Sorry for long post, any help would be great
I did a lot of research prior to doing install and was told that I should have no rubbing or scrubbing with going with 32" tires. However I cannot tell if the wheels just weren't aligned right because they're only rubbing on the back of the wheel well and about an inch of clearing on front wheel well on full turns.
Alignment shop told me to let suspension break in before ride feels right but I don't think that sounded right. Wheel pulls pretty hard and has slight vibration at low speeds.
Basically I think the alignment guy was not very good and was hoping that someone on here is from rockland county NY and can reccomend a good alignment shop before I start trimming any plastic.
Sorry for long post, any help would be great