TacoBobG
Active Member
Finally figured how to adjust new aftermarket headlamps. I had to use long #2 Philips screwdriver in groove to adjuster screw and turn the screw in back of headlamp lower screw in a clockwise rotation to lower beam so at 25 ft away from marked wall at 39 inch center height down 2 inches to below 37 inches. Lights are now on the road more and not to blind oncoming autos. Some of the other post said counter clockwise to lower beam. OEM from Toyota might be counter clockwise,and my new aftermarket NILIGHT are opposite , clockwise. Hope this help some others if replacing workout OEM with cheaper aftermarket new headlamps like me. Much brighter and clear again. Couldn't afford the Toyota OEM pair $600 + ones had to go with Amazon $115 a pair.